mozna by pomohlo pro studium tohle
http://mail.lipsia.de/~enigma/neu/6581.html
http://electronics.stackexchange.com/questions/13472/is-it-possible-to-reverse-engineer-a-chip-design
http://www.righto.com/2014/09/reverse-engineering-counterfeit-7805.html
http://www.righto.com/2014/05/reverse-engineering-tl431-most-common.html
http://siliconzoo.org/tutorial.html
Jeste existuje stranka ktera se zabyva primo reverzem cipu jako jsou SID VIC-II 6502 Z80 a dalsich... ale bohuzel ji ted nemuzu najit.
Pekny vecer
Sillicon
Zobrazit citovaný text
---------- Původní zpráva ----------
Od: Martin Lukasek <martin.lukasek[doména skryta]>
Komu: Počítače SHARP MZ a jejich emulátory <sharpmzmail.ordoz.com>
Datum: 5. 11. 2016 11:40:03
Předmět: Re: [SharpMZ] MZ-800 GDG pod Rentgenem
_______________________________________________Pecka. Sice z toho nepoznam vubec nic, ale vypada to skvele ;-) Je zajimavy, jak v tom zvetseni 50x (a vlastne i 20x) jsou ty cesty popraskany. To nevadi funcnosti nebo to vniklo az pri mani[ulaci s tim cipem?
Jinak, pokud by nekdo vytvoril nejakou kucharku, jak co poznat, tak bychom si to mohli nejak rozdelit a kazdy treba zanalyzovat kus.
Krasny den
Martin
From: sharpmz-bouncesmail.ordoz.com [mailto:sharpmz-bouncesmail.ordoz.com] On Behalf Of Vaclav Peroutka
Sent: Friday, November 4, 2016 10:31 AM
To: Počítače SHARP MZ a jejich emulátory <sharpmzmail.ordoz.com>
Subject: Re: [SharpMZ] MZ-800 GDG pod Rentgenem
Ahoj,
tak mám nějaké další fotky po odpouzdření. Ale jsou větší, tak jsem je umístil semhle:
https://goo.gl/photos/PmAHMrD5jFeqXeC87
Koukněte na ně, pro čip si půjdu někdy příští týden, ve mlýně můžeme probrat, co s tím dál, jestli vubec někdo najde čas a odvahu dělat reverze engineering.
Vašek
Ahoj,
konečně jsem se dostal k tomu něco udělat s GDG. Když už se tedy blíží i ten sraz ve Žďáru.
Pro začátek mám XRAY fotky.
Vašek
SharpMZ mailing list
SharpMZmail.ordoz.com
http://mail.ordoz.com/mailman/listinfo/sharpmz
Vlákno · 45 zpráv
- [SharpMZ] MZ-800 GDG pod Rentgenem Přílohy: 4
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem
- Re: [SharpMZ] MZ-800 GDG pod Rentgenem