Původní podoba příspěvku
Surová data tak, jak byla v roce 2013 stažena z Pandory (HTML zdroj bez úprav, osobní e-mailové adresy jsou maskované).
<!--------------------------------------------------------------> <table width="100%"><tr><td align="left" valign="middle"></td><td align=right valign="middle"></td></tr></table><BR><pre>rodil mezi ARB-1 a ARB-1C je v tom ze ma jine budice a vice konektoru jinak jsou stejne odpory R6 az R9 jsou pridany kvuli tomu ze jirka biba ma (mel) v lpanu ARB-1C skratin na standartni delku ARB-1 cimz bi nebilo kam dat zatezujici odpory co jsou na puvodni ARB-1 (IOR, IOW, MR, MW) zakoncovaci orpory SIP jsou prdany z toho duvodu ze uz je zbernice prilis dlouha a muzou se obevit probleby s odrazi a jine neprijemnosti JP3 je pridan pro pripad pouzity procesorove desky PKT-1 ze SAPI-1.5 kdy 1-2 trvale adstavy 8282/8286 cimz se defakto rijde o jeden konektor ale zbitek zbernice bude zcela pasivni tak jak to je u SAPI-1.5 (aspon podlele PKT-1 by to tak melo byt) 2-3 normalni funkce budicu jak na ARB-1 ac to nebilo zamerem ale lze osadit i budice 8286 dele katalogu TESLA da MHB8282 (8286) v L max 32mA (max 32mA strana B) v H max 5mA (max 5mA strana B) knihovny mohu nahrat ale mam je na jine masine takze az nekdy chces jen ty konkretni knihovny co jsou pouzity na ARB-1C nebo vsechny ktere jsem upravoval (ci vytvarel) (knihovny co maji na zacatku "#_mm" jsou prispusobeny pro mm rastr) <span class="replyquote1">> > > Kluci nijak jsem se o vlastni schema predtim detailne nezajimal a verim > ze to mate zkontrolovany. Ale souhlasim ze kazdy se ma na to podivat a > rici vse co ma na srdci a zodpovida za projekt. A tim padem zaplati i > pripadny zmetek :-). > > - Proto se chci optat jak bude zapojeny JP3. Jestli pin 1 bude > nezapojeny a mezi 2 a 3 bude klema? > - Zda mam pravdu ze I8282 muze napajet az 20 IO typu 74xx. A az 80 IO > 74LSxx. > - Zda Petr da do samostatneho adresare knihovny co nejsou soucasti Eaglu. > > Dik za odpoved. > > Radek > > > Partlist > > Exported from ARB-1C_ZPC.brd at 30.8.2012 22:16:47 > > EAGLE Version 5.6.0 Copyright (c) 1988-2009 CadSoft > > Part Value Package Library Position > (mm) Orientation > > C1 15n C025-024X044 rcl (223.75 > 110) R90 > C2 15n C025-024X044 rcl (203.75 > 110) R90 > C3 15n C025-024X044 rcl (183.75 > 110) R90 > C4 15n C025-024X044 rcl (163.75 > 110) R90 > C5 15n C025-024X044 rcl (143.75 > 110) R90 > C6 15n C025-024X044 rcl (123.75 > 110) R90 > C7 15n C025-024X044 rcl (221.25 > 107.5) R90 > C8 15n C025-024X044 rcl (201.25 > 107.5) R90 > C9 15n C025-024X044 rcl (181.25 > 107.5) R90 > C10 15n C025-024X044 rcl (161.25 > 107.5) R90 > C11 15n C025-024X044 rcl (141.25 > 107.5) R90 > C12 15n C025-024X044 rcl (121.25 > 107.5) R90 > C13 22n C050-024X044 rcl (221.25 > 63.75) R90 > C14 22n C050-024X044 rcl (201.25 > 63.75) R90 > C15 22n C050-024X044 rcl (181.25 > 63.75) R90 > C16 22n C050-024X044 rcl (161.25 > 63.75) R90 > C17 22n C050-024X044 rcl (141.25 > 63.75) R90 > C18 22n C050-024X044 rcl (121.25 > 63.75) R90 > C19 22n C050-024X044 rcl (218.75 > 111.25) R90 > C20 22n C050-024X044 rcl (198.75 > 111.25) R90 > C21 22n C050-024X044 rcl (178.75 > 111.25) R90 > C22 22n C050-024X044 rcl (158.75 > 111.25) R90 > C23 22n C050-024X044 rcl (138.75 > 111.25) R90 > C24 22n C050-024X044 rcl (118.75 > 111.25) R90 > C25 47u E25-9 rcl (250 > 30) R180 > C26 47u E25-9 rcl (281.25 > 41.25) R270 > C27 47u E25-9 rcl (290 > 41.25) R270 > C28 47u E25-9 rcl (298.75 > 41.25) R270 > C29 15n C025-024X044 rcl (103.75 > 110) R90 > C30 15n C025-024X044 rcl (83.75 > 110) R90 > C31 15n C025-024X044 rcl (63.75 > 110) R90 > C32 15n C025-024X044 rcl (43.75 > 110) R90 > C33 15n C025-024X044 rcl (23.75 > 110) R90 > C34 15n C025-024X044 rcl (263.75 > 110) R90 > C35 15n C025-024X044 rcl (101.25 > 107.5) R90 > C36 15n C025-024X044 rcl (81.25 > 107.5) R90 > C37 15n C025-024X044 rcl (61.25 > 107.5) R90 > C38 15n C025-024X044 rcl (41.25 > 107.5) R90 > C39 15n C025-024X044 rcl (21.25 > 107.5) R90 > C40 15n C025-024X044 rcl (261.25 > 107.5) R90 > C41 22n C050-024X044 rcl (98.75 > 111.25) R90 > C42 22n C050-024X044 rcl (78.75 > 111.25) R90 > C43 22n C050-024X044 rcl (58.75 > 111.25) R90 > C44 22n C050-024X044 rcl (38.75 > 111.25) R90 > C45 22n C050-024X044 rcl (18.75 > 111.25) R90 > C46 15n C025-024X044 rcl (243.75 > 110) R90 > C47 22n C050-024X044 rcl (101.25 > 63.75) R90 > C48 22n C050-024X044 rcl (81.25 > 63.75) R90 > C49 22n C050-024X044 rcl (61.25 > 63.75) R90 > C50 22n C050-024X044 rcl (41.25 > 63.75) R90 > C51 22n C050-024X044 rcl (21.25 > 63.75) R90 > C52 15n C025-024X044 rcl (241.25 > 107.5) R90 > C53 22n C050-024X044 rcl (261.25 > 63.75) R90 > C54 22n C050-024X044 rcl (258.75 > 111.25) R90 > C55 22n C050-024X044 rcl (238.75 > 111.25) R90 > C56 22n C050-024X044 rcl (241.25 > 63.75) R90 > IC1 8282-A DIL20 micro-siemens_MP (287.02 > 83.82) R90 > IC2 8282-A DIL20 micro-siemens_MP (261.27 > 88.9) R90 > JP1 JP1 jumper_MP (218.125 > 38.125) MR0 > JP2 JP4 jumper_MP (303.49 > 20.26) MR90 > JP3 JP2 jumper_MP (277.5 > 60) MR270 > R1 10k 0207/10 rcl (22.5 > 122.5) R90 > R2 10k 0207/10 rcl (20 > 123.75) R90 > R3 10k 0207/10 rcl (25 > 125) R90 > R4 10k 0207/10 rcl (17.5 > 121.25) R90 > R5 10k 0207/10 rcl (285.75 > 67.29) R0 > R6 10k 0207/7 #_mm_rcl_u (117.5 > 56.25) R270 > R7 10k 0207/7 #_mm_rcl_u (123.75 > 57.5) R270 > R8 10k 0207/7 #_mm_rcl_u (137.5 > 58.75) R270 > R9 10k 0207/5V #_mm_rcl_u (143.75 > 58.75) R270 > RN3 10k SIL9 resistor-sil_MP (2.5 > 44.375) R90 > RN4 10k SIL9 resistor-sil_MP (5 > 45.625) R90 > RN5 10k SIL9 resistor-sil_MP (2.5 > 68.125) R90 > RN6 10k SIL9 resistor-sil_MP (5 > 69.375) R90 > RN7 10k SIL9 resistor-sil_MP (2.5 > 91.875) R270 > RN8 10k SIL9 resistor-sil_MP (5 > 93.125) R270 > X1 TX5186242/62B con-FRB_TESLA (266.75 > 34.75) R270 > X2 TX5186242/62B con-FRB_TESLA (226.75 > 34.75) R270 > X3 TX5186242/62B con-FRB_TESLA (206.75 > 34.75) R270 > X4 TX5186242/62B con-FRB_TESLA (186.75 > 34.75) R270 > X5 TX5186242/62B con-FRB_TESLA (166.75 > 34.75) R270 > X6 TX5186242/62B con-FRB_TESLA (146.75 > 34.75) R270 > X7 TX5186242/62B con-FRB_TESLA (126.75 > 34.75) R270 > X8 TX5186242/62B con-FRB_TESLA (86.75 > 34.75) R270 > X9 SAPI_ARB_NAP_TX_MP TX5143042/30B con-FRB_TESLA (292.75 > 24.5) MR180 > X10 TY_WK18022 TY_WK18022 con-FRB_TESLA (289.75 > 131.75) R0 > X11 TX5186242/62B con-FRB_TESLA (106.75 > 34.75) R270 > X12 TX5186242/62B con-FRB_TESLA (66.75 > 34.75) R270 > X13 TX5186242/62B con-FRB_TESLA (46.75 > 34.75) R270 > X14 TX5186242/62B con-FRB_TESLA (26.75 > 34.75) R270 > X15 TX5186242/62B con-FRB_TESLA (6.75 > 34.75) R270 > X16 TX5186242/62B con-FRB_TESLA (246.75 > 34.75) R270 > X17 ATX24_PWR KATX24 con-pc (206.385 > 26.65) MR180 > X18 AT_P8_PWR KAT6 con-pc (218.265 > 15.22) MR0 > X19 AT_P9_PWR KAT6 con-pc (194.505 > 15.22) MR0 > > > > Dne 30.8.2012 22:13, Jardax (sapi@pandora.cz) napsal(a): </span><span class="replyquote2">> > > > Petr byl rychlejsi :) > > To je ona, takze je Beno ma, to je fajn. > > > > Dne 30.8.2012 22:06, Radek Suk (sapi@pandora.cz) napsal(a): </span><span class="replyquote3">> >> > >> Kluci chci se optat zda vhodna vlozka pro tento konektor pro tu ARB1C > >> kartu je tato vlozka > >> </span>http://www.elektrobazar.com/catalog/product/51032-prislusenstvi-konektoru-frb-a- <img src="BODY_IMAGES_WRAP_GIF">souriau <span class="replyquote3">> >> > >> Radek > >> > >> Dne 29.8.2012 12:31, Martin Lukasek (sapi@pandora.cz) napsal(a): </span><span class="replyquote1">> >>> > >>> Ahoj, > >>> > >>> diky, ja potvrzuji jednu desku a taktez nijak nespecham. Treba by se > >>> to dalo nacasovat s uzaverkou tak, aby se to dalo rozdat na > >>> BYTEFESTu, tj. tak cca pulka zari a nemuselo se to posilat postou. > >>> > >>> Jiak, komu staci SOURIAU misto FRB, tak zde za 25 Kc > >>> http://www.elektrobazar.com/catalog/product/5140-konektor-tx-525-62-12 > >>> a maji i protikusy do desek za 12 Kc. > >>> > >>> Ahoj, Martin > >>> > >>> --------------------- > >>> sapi@pandora.cz > >>> Konference o SAPI-1 > >>> > >>> > >>> --- > >>> </span><span class="replyquote3">> >> > >> --------------------- > >> sapi@pandora.cz > >> Konference o SAPI-1 > >> --- > >> > >> </span><span class="replyquote2">> > > > --------------------- > > sapi@pandora.cz > > Konference o SAPI-1 > > --- > > > > </span><span class="replyquote1">> > --------------------- > sapi@pandora.cz > Konference o SAPI-1 > --- </span> </pre>